PA- Commercial Sound and Emergency Sound

PVA-2P500 Amplificador potencia, 2x500W


  • Amplificador de clase D, 2 ✕ 500 W
  • Bajo consumo de alimentación en el modo de espera (3 W)
  • Entrada local por cada canal
  • Excelente calidad del sonido: más de 104 dB de relación señal a ruido

Descripción

Rated load impedance (output power)
100 V 20 Ω (500 W)
70 V 10 Ω (500 W)
Rated output power, 1 kHz, THD ≤ 1% 2 ✕ 500 W1
Rated input voltage +6 dBu
Max. RMS voltage swing, 1 kHz, THD ≤ 1%, without load
100 V 110 V
70 V 78 V
Voltage gain, ref. 1 kHz, fixed
70 V 33.2 dB
100 V 36.2 dB
Maximum load capacitance 2 µF
Input level, max. +18 dBu (9.75 Vrms)
Frequency response, ref. 1 kHz, rated load, -3 dB 50 Hz to 25 kHz
Input impedance, active balanced 20 kΩ
Signal-to-noise ratio (A-weighted) > 104 dB
Output noise (A-weighted) < -62 dBu
Crosstalk , ref. 1 kHz < -85 dB
Output stage topology Class-D, transformer, floating
Power requirements
Power supply Mains: 115-240 VAC ±10%, 50/60 Hz (2) Battery: 21-32 VDC
Power consumption Pmax – 3dB * / idle **/ Standby 230VAC, 50Hz: 700W / 21W / 1.9W120VAC, 60Hz: 745W / 18W / 1.5W24VDC, 60Hz: 735W / 16W / 1.5W * Alarm, ** No audio (pilot tone)
Inrush current 2 A
Inrush current, after five-second power cycle 1.3 A
Mains fuse T6.3A (internally)
DC fuse 30A (internally)
Ground fault R < 50 kΩ
CAN BUS port 2 ✕ RJ-45, 10 to 500 kbit/s
Protection Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter, ground fault
Cooling Front-to-rear, temperature-controlled fans
Operating temperature -5 °C to +45 °C (+23 °F to +113 °F)
Storage temperature -40 °C to +70 °C (-40 °F to +158 °F)
Humidity (non-condensing) 5% to 90%
Altitude Up to 2000 m
Dimensions (HxWxD) 88 mm x 483 mm x 375 mm (2RU)
Weight (net) 16.5 kg
Mounting Standalone; 19 in. rack
Color Black with silver

Documentos

TituloTipoIdioma
Hoja de DatosPDFen-US