FPD-7024-A Central incendio, 4 z. 24V, Anatel, roja

Four initiating zones (expandable to eight); up to 20 two‑wire smoke detectors per zone
Programmable through keypads or remote programming software (RPS) through a Conettix interface module
Two notification appliance circuits (NACs) on board with a shared internal regulated 24 VFWR, 4 A NAC power supply
Easily converts to addressable with the addition of a D7039 Multiplex Expansion Module

Descripción

Current (alarm):	380 mA
Current (standby):	200 mA
Power (primary):	120 VAC, 1.2 A maximum, 60 Hz or 240 VAC, 0.75 A maximum, 50 Hz
* For product‑specific current values, see the product’s Installation Instructions.
Environment:	Indoor, dry
Relative Humidity:	Up to 95%, non-condensing
Temperature (operating):	+32°F (0°C) to +120°F ( +49°C)
Color:	Red
Dimensions (HxWxD):	20.8 in. x 15 in. x 4.3 in. (52.8 cm x 38.1 cm x 10.9 cm)
Material:	Cold-rolled steel Base: 18 gauge (1.2 mm) Cover: 19 gauge (1.1 mm)
Current:	44 mA maximum per loop
Line resistance:	150 Ω
Voltage:	24 VDC nominal
NAC:	24 VDC nominal, 4 A maximum
On-board Relays:	Three Form C contacts rated at 5 A, 28 VDC
Off-board Relays:	Up to two D7035 Octal Relay Modules with each providing eight Form C relay outputs; contacts rated 5 A, 28 VDC In an addressable system, up to 20 D7053 Multiplex Input-Output Modules are allowed per bus for a total of 40

Titulo	Tipo	Idioma
Hoja de Datos	PDF	en-US